About OZK

Ozk is an independent R&D brand specializing in electronic engineering, embedded software, high-speed PCB design and digital product development.Our vision is   to create a product ecosystem that pushes the boundaries of electronics as well as hardware, adds real value to the user, and provides access to advanced technology for everyone .Ozk is a developer community and brand identity that combines deep engineering experience with practical innovation.


🔧 PCB Design & Manufactfuring Engineering

As Ozk in the PCB field:

  • 4-8 layer high-speed card design

  • DDR3/DDR4 topology & timing analysis

  • Ethernet RGMII/SGMII line optimization

  • USB 2.0/3.0 high-speed impedance control

  • RF line design, 50/75 ohm line analysis

  • Gerber optimization and production verification

  • EMI/EMC, return path, ground strategy

  • We specialize in power distribution (PDN) modeling

Not every project is simply two lines drawn on a computer screen. Every via, every trace, every polygon is created through conscious decisions.

Thanks to our self-developed  “DDR Analyzer / PCB Analyzer” software  :

  • Automatic topology extraction from Gerber/IPC data

  • Net-based visual analysis

  • Stack-up management

  • IBIS based fast simulation

  • We offer interactive 2D/3D views

  • In short:  Ozk isn't just a PCB design brand; it's a PCB analysis platform.


🔌 Embedded Software & Firmware Development

We do directly firmware development on platforms such as ESP, STM32, Raspberry:

  • FreeRTOS architecture

  • ESP32 low-power modes & sensor integration

  • High performance codes based on STM32 HAL/LL + DMA

  • QSPI bootloader architectures

  • USB VCP, TinyUSB audio classes

  • Advanced drivers for SPI/I2C/I2S protocols

  • BLDC FOC/6-step driver algorithms

  • Parametric sensors and custom telemetry

  • Precise sensor fusion (MPU6050, barometer, etc.)

Our software vision is simple:
Every line of code should arise from an engineering decision.


🎧 Audio & DSP Technologies

Ozk is a brand that also specializes in audio processing.
Our areas of expertise include:

  • 24-bit / 48 kHz stereo I2S structures

  • Hardware accelerated DSP pipeline

  • USB audio input/output architectures

  • EQ, HPF, LPF, Notch, Echo/Delay operations

  • Own sound synthesis experiments, FM/AM generators

  • Audio + RF hybrid projects

Thanks to this knowledge, we can develop both hardware sound cards and embedded music processing products.


⚙️ Custom Product Development and Prototyping

 Ozk offers not only engineering services but also  product-oriented innovation .

The product concept we have developed or are working on:

  • Smartwatch/telemetry devices

  • Paragliding sensor systems

  • BLDC motor driver cards

  • Custom designed power supplies

  • Sensor fusion pedometer/smart devices

  • Advanced PCB analysis software

Every product is born from the combination of
Electronics + Software + Mechanics + Experience 


🧠 Our Vision

What sets Ozk apart from other brands is not just technical capability, but also the way of thinking.

Our vision:

  1. Making electronics accessible to everyone
  2. Producing products that push the boundaries in engineering
  3. Being a brand that develops its own tools  (analysis software, PCB tools)
  4. Producing sustainable and modular technology
  5. Building a community-driven, open innovation-based ecosystem

Ozk  aims to be
a brand that will be known not only for what it produces today but also for what it will produce in the future .

Popular posts from this blog

XC7Z010, SoC PCB design with FPGA IC

Image
The board features the design of the Xilinx (now AMD) Zynq-7000 series XC7Z010 SoC chip in a FBGA package. The sketch shows a high-density BGA package, DDR3 memory interface, power/ground connections, and signal routing. The Zynq-7000 is an SoC that integrates ARM Cortex-A9 processor cores with FPGA programmable logic. XC7Z010 Features: 28nm technology, 28k logic cell DDR3 support, integrated Ethernet, USB, and GPIOs. Power consumption is low (typical 2-5W, depending on usage). Applications: Optimized for industrial IoT, embedded vision, and motor control. Those familiar with FBGA design and coding will know that it's very challenging, and the application areas are generally industrial solutions. Role in Zynq-7000: The symmetrical BGA distribution between the ARM and FPGA, as seen in the diagram, is critical for signal integrity, as is the difficulty of fan-out routing and impedance calculations. Because the circuit is designed entirely for IP-controlled signal processing, high-fre...
Read more

Designed for Flight, Redesigned for Your Wrist: The New Vario Watch Edition

Image
Hello, we hope everything is okay. Today we would like to share with you our project for the next generation vario device, which we have been working on for the last few monthsello, we hope everything is okay. Hello, we hope everything is going well. Today, we'd like to share with you our next-generation Vario device project, which we've been working on for the past few months. We'll cover all the key stages of the project development journey, from the technical challenges we encountered to design decisions, mistakes made, and lessons learned. Let's take a look at the details together. As those interested in paragliding know, Vario devices, which precisely measure ascent and descent rates during flight, are a critical need. The fact that products on the market sell for around €500 and the impact of exchange rates led us to realize an idea we'd been considering for a long time: producing our own Vario device. Today, we've developed the device for well under €100....
Read more

Nau88c22-driver: Professional Audio CODEC Solution

Image
Hello! If you're developing audio-based embedded systems, meet a solution that will take your project to the next level: the Nau88c22-driver. This project provides a simple, modular, and reliable C-based driver framework for high-quality audio CODEC integration. 🔧 Project Purpose & Benefits The project includes a driver software that provides direct access to the NAU88C22 audio CODEC. This allows you to easily manage audio streams—stereo, speaker, or headphone output—in microcontroller-based systems. The driver design is kept simple: register-based control over the basic I²C interface; if necessary, it can be extended with higher-level I²S configuration and code additions. This makes it a suitable solution even for embedded and resource-constrained devices. GitHub https://github.com/hmz06967/Nau88c22-driver Shared with an open source approach; It can be freely used as a reference or modified—providing flexibility for both industrial and hobby/research projects. 📦 Who is it S...
Read more