Next Generation FPV & RC Control Technology: Mini Controller Powered by RP2040

 Hello, we hope everything is fine.

 Today, we would like to introduce you to our mini controller card that we developed and successfully produced many years agoello, we hope everything is fine.

 Today, we would like to introduce you to our mini controller card that we developed and successfully produced many years ago. Whether you use it for drones, FPV or RC vehicles, this card has a strong design and engineering approach behind its compact structure.




We are generally very selective about sharing project files. However, we do not hesitate to present some of our cards, including their schematics, openly, as long as they are not against the public, do not require intensive R&D processes and we see the benefit in sharing. Because we continue this journey not only to improve, but also to grow by sharing knowledge. It is our principle to reinforce what we have learned, to inspire our curious colleagues and to respectfully refer to everyone who has worked in this field.



The RP2040 microcontroller has a different architecture than traditional MCU's. It works with hardware programmable units similar to FPGA logic and defines this as PIO (Programmable I/O) within itself. This approach offers a special hardware infrastructure that can work like an external task unit without keeping the processor busy. It provides a reliable solution independent of CPU interrupts, especially in applications that require critical timing such as motor control, high-precision reading operations or control communication.

As you experience this technology, you feel your horizons expand and you appreciate the possibilities offered by engineering even more. For this reason, we would like to thank the manufacturers and the entire team that developed this platform wholeheartedly.

In short:As you experience this technology, you feel your horizons expand and you appreciate the possibilities offered by engineering even more. For thi

Comments

Post a Comment

Popular posts from this blog

XC7Z010, SoC PCB design with FPGA IC

Image
The board features the design of the Xilinx (now AMD) Zynq-7000 series XC7Z010 SoC chip in a FBGA package. The sketch shows a high-density BGA package, DDR3 memory interface, power/ground connections, and signal routing. The Zynq-7000 is an SoC that integrates ARM Cortex-A9 processor cores with FPGA programmable logic. XC7Z010 Features: 28nm technology, 28k logic cell DDR3 support, integrated Ethernet, USB, and GPIOs. Power consumption is low (typical 2-5W, depending on usage). Applications: Optimized for industrial IoT, embedded vision, and motor control. Those familiar with FBGA design and coding will know that it's very challenging, and the application areas are generally industrial solutions. Role in Zynq-7000: The symmetrical BGA distribution between the ARM and FPGA, as seen in the diagram, is critical for signal integrity, as is the difficulty of fan-out routing and impedance calculations. Because the circuit is designed entirely for IP-controlled signal processing, high-fre...
Read more

Designed for Flight, Redesigned for Your Wrist: The New Vario Watch Edition

Image
Hello, we hope everything is okay. Today we would like to share with you our project for the next generation vario device, which we have been working on for the last few monthsello, we hope everything is okay. Hello, we hope everything is going well. Today, we'd like to share with you our next-generation Vario device project, which we've been working on for the past few months. We'll cover all the key stages of the project development journey, from the technical challenges we encountered to design decisions, mistakes made, and lessons learned. Let's take a look at the details together. As those interested in paragliding know, Vario devices, which precisely measure ascent and descent rates during flight, are a critical need. The fact that products on the market sell for around €500 and the impact of exchange rates led us to realize an idea we'd been considering for a long time: producing our own Vario device. Today, we've developed the device for well under €100....
Read more

Nau88c22-driver: Professional Audio CODEC Solution

Image
Hello! If you're developing audio-based embedded systems, meet a solution that will take your project to the next level: the Nau88c22-driver. This project provides a simple, modular, and reliable C-based driver framework for high-quality audio CODEC integration. 🔧 Project Purpose & Benefits The project includes a driver software that provides direct access to the NAU88C22 audio CODEC. This allows you to easily manage audio streams—stereo, speaker, or headphone output—in microcontroller-based systems. The driver design is kept simple: register-based control over the basic I²C interface; if necessary, it can be extended with higher-level I²S configuration and code additions. This makes it a suitable solution even for embedded and resource-constrained devices. GitHub https://github.com/hmz06967/Nau88c22-driver Shared with an open source approach; It can be freely used as a reference or modified—providing flexibility for both industrial and hobby/research projects. 📦 Who is it S...
Read more